This gas information sheet explains how to achieve compliance when designing a consumer piping support system that varies from the AS/NZS 5601.1:2022 ‘means of compliance’ requirements.
A consumer piping support system must comply with the ‘means of compliance’ requirements of AS/NZS 5601.1:2022 (Section 5.8).
Where a proposed support system varies from these requirements—for example, a support system that includes the support of multiple pipes on a trapeze or single pipes using undersized diameter rod hangers and/or non-compliant support spacing—then a performance-based design application (as per Section 2 of AS/NZS 5601.1:2022) must be submitted to Energy Safe Victoria (ESV) for review and acceptance.
Submitting a Performance-based Design application
Create and submit a gas application in , ESV’s online gas application system; stating within the “basic details section” that you are using a performance-based design for the pipe support system and attach a separate document outlining your performance-based design proposal.
Supporting documentation from both the applicant and a competent person must be submitted to verify that the design meets the required performance outcomes.
The applicant must
- provide a detailed description of the performance outcomes the alternative solution is required to meet from Section 2 – AS/NZS 5601.1:2022, in particular clauses 2.1.4 and 126.96.36.199, or other clauses deemed relevant.
- which ‘means of compliance’ clause/s from Sections 3 to 6 of AS/NZS 5601.1:2022 the performance- based design relates to.
- specific section/location of the gas installation that the performance-based design relates to. (For example, ‘the piping in the basement car park from the gas meter room to the mechanical services plantroom’)
Additional information from a competent person to support the application must include
- Details of the relevant site address and location of the installed piping system.
- Evidence from the competent person that the supplied piping support system is based on their assessment of the proposed installation’s support requirements.
- A schematic of the piping route clearly showing how many pipes are supported, with pipe size and support spacing noted.
- Details of the materials to be used in the piping support system, for example, the size and type of anchors, rod hangers, horizontal supports, clip heads, and component working load limits / specifications etc.,
- Information about whether the piping support system requires additional design or components to allow flexibility for expansion movement, and if so, how that will be managed
Supporting documentation will only be accepted if it is supplied and signed off by a competent person.
A ‘competent person’ is defined by AS/NZS 5601 as a person or body who through training, qualification or practical experience or a combination of these and understanding of the equipment and processes is able to verify compliance with this Standard.
In relation to a performance based design for consumer piping support systems; ESV deem a ‘competent person’ to be
- A suitably qualified engineer if it is a custom designed system with no supporting information from a piping support manufacturer.
- An authorised representative from the piping support system manufacturer if it is a proprietary system with supporting information from the piping support manufacturer.
If the application is:
- a new application, then attach the performance-based design for the proposed gas piping support system as a separate document within your GasTrac gas application.
- in response to an identified non-compliance and if the installed system is to remain unmodified, submit a performance-based design application for review and approval.
Date: 02/12/2023 5:01
The currency and accuracy of this document cannot be guaranteed once printed or saved to a storage device. If in doubt, please check the ESV website for the current version.
Reviewed 30 January 2023